Repair tips for my concrete: As the pros do it

Who wouldn’t love the look of polished, flawless floors?

As you stroll in your home and feel even steps beneath your feet, suddenly you see a crack on the floors. Or, worse, you tripped accidentally on a chipping or spalling concrete. Ouch!

Concrete is a durable material but due to weathering and old age signs of damage soon surface. Today’s blog tells you tips for a concrete resurfacing Houston TX. Learn here essential steps, tools that you may not usually use, cost-saving tips, and more.

man repairing concrete

How to Repair Concrete: 5 Tips For You

Let’s get you some work to do—start-off with tip number 1, and so on.

1- Floor Prep: The Most Important Tip

You can read many tips in this list or from any sources around the net. But if you neglect floor preparation, all work you got into your floors will be of no avail if you do not prep the concrete surface.

If you only see tiny cracks on the surface, you do not want to pour a new overlay on it without cleaning and polishing the surface. Resurfacing uses the practical solution, but new layers of concrete and concrete coatings will adhere effectively if the surface is clean and free from any solid particles.

2 - Local Aggregates: Cost-Saving Material

When you say “local,” you often doubt its quality. But not if you look for certified contractors and suppliers near you. You can find them easily online nowadays. The internet can help you with those.

But for choosing the materials for your repairs. It’s’ good to use aggregates locally supplied in your area. What you have to bear in mind is to save costs for the shipping of materials.

Besides, repairs will not require a large amount of concrete materials. Local suppliers are the best source of minimal material demand. So go for it!

3- Waste Factor In

What does this mean? Tip number three recommends that you factor in the waste margin. Waste margin is what you allot in buying your materials to prevent shortage during the application process.

For instance, in baking, you use a bag of flour good for one batch of bread. Then it turns out you need to do two sets of bread to bake. So, you run to the local store only to run short of time or run to a 24-hour grocery in the middle of the night to finish all batches in one baking period.

Consider the same scenario with your concrete floor repair when using up your cement materials and the like. In short, it’s better to have an excess than go short of materials.

4- Primer is your prime solution

Have you thought of delaying your concrete floor repair because of the downtime it may cost you? That is why flooring contractors and surfacing experts high;y advised to use a primer before laying any floor coatings. Applying a primer assures you that the concrete floor coatings cure fast and efficiently.

Tip number 4 is most suitable, mainly if you repair epoxy floors or garage flooring that uses paints or latex acrylic coatings.

5- Hammer down the surface: Test before repair

Hammer? Yes, you got that right! Use a hammer before repairing the concrete flooring.

But you may ask, “isn’t that you need to repair the floor and not bring further damages on it? Yes, again.

To hammer down your damaged concrete floor means to check or test the surface. This way, you will be abv to see how bad the cracks or the chipping had got.

But here is the catch, an ordinary person does not just perform this process. You need an expert flooring contractor to do this. Only experts can test and examine the actual condition of damaged floors. It is like a doctor who checks up on ill patients. You need someone with a license and years of experience to tap a hammer on concrete joints and surfaces.

Scroll to Top